Aerobatics Server ACRO E-mail Archive Thread: [IAC] Advanced Known [International Aerobatic Club] [Articles etc] [Communications] [Contest and Patch Information] [Aviation Organizations] [Other Aerobatics Info] [Aerobatics Images] [Other Aerobatics Links] [Other Aviation Info (including weather)] [Search ACRO Website] Disclaimer: These aerobatics pages are developed by individual IAC members and do not represent official IAC policy or opinion.

[Usage Statistics]

ACRO E-mail Archive Thread: [IAC] Advanced Known

Thread: [IAC] Advanced Known

Message: Re: [IAC] Advanced Known

Follow-Up To: ACRO Email list (for List Members only)

From: DSowder at aol.com

Date: Wed, 06 Dec 2000 15:31:39 UTC

Message:

  In a message dated 12/6/00 12:04:36 AM Pacific Standard Time, PGNic at AOL.COM 
writes:

<< Could Fig. 11 in the proposed Advanced Known be right? If it is how will 
it 
 be done? Will each half roll be 60 degrees?  >>

Figure 11 is a 180 degree turn with 1 1/2 rolls. You just calibrate your 
roller/turner for 3 degrees of roll per degree of turn. There should be a 
knob on the panel....

I like to reduce these down to what my attitude will be each 90 degrees of 
turn. In this case, at 90 degrees I'll be knife edge and pushing. At 180 
degrees, I'll be finishing inverted.

Doug Sowder

If you have aerobatics related information that you would like to make available, please contact me at the email address below.
	Last Update: Fri May 4 13:13:27 2012
© Dr. Günther Eichhorn	Springer 233 Spring Street New York, NY 10013 USA, Email Guenther Eichhorn